Components; Correct Use - Meister MFW300-1 Traduction Du Manuel D'utilisation Original

MW-5454300-Bediene-1602_(4) 18.02.16 09:36 Seite 48
The specified vibration emission value
was measured in accordance with a
normed test procedure and can be used
in order to compare one electrical tool
with another.
The specified vibration emission value
can also be used for an introductory
evaluation of the influence.
CAUTION! The vibration
emission value may fluctuate
from the specified value during use of
the power tool. These fluctuations
will depend on the way in which the
power tool is used.
Safety measures must be taken in
order to protect the operator. As a
result, the evaluation of the influence
must be made whilst taking account
of the actual conditions of use. (All
parts of the operating cycle must be
taken into account for this purpose.
This also includes times in which the
power tool is switched off and times
in which it is switched on, but is
running without load.)
CAUTION! A certain amount of
noise is unavoidable when using
this device. Ensure you carry out
noise-intensive work during
permitted times. Maintain the quiet
periods and limit your work to the
absolute minimum.
CAUTION! The effects of noise
may cause damage to the
hearing. Only ever work with suitable
ear defenders. Anybody else in the
vicinity should thus also wear ear
defenders.
48
3 – Components
1 On/Off switch
2 Speed regulator
3 Power cable with plug
4 Retaining clip
5 Tool mounting socket
6 Internal thread for handle
7 Handle
8 Extraction duct
9 Connection nozzle
10 Suction adapter
11 Allen key
12 Hex socket screw
13 Washer
14 Plunge-cut saw blade
15 Segment saw blade
16 Sanding plate
17 Sanding sheet, 6 x (various grades)
4 – Correct use
The multifunction tool is designed
exclusively for sawing, cutting, scraping
and sanding in poorly accessible
places. The multifunction tool is only
intended for indoor use. It is designed
exclusively for domestic use and is not
suitable for commercial applications.
Only use the multifunction tool in
accordance with the instructions in this
user guide. Any other use is not in
accordance with the intended purpose
and may result in personal injury or
damage to property. The multifunction
tool is not a children's toy.
Neither the manufacturer nor the retailer
accept any liability for losses resulting
from improper or incorrect use.
This unit may not be used by people
with reduced physical, sensory or
mental capacities, with a lack of
experience and without the appropriate
knowledge, unless they are supervised