Creating A Parameter Configuration Offline; Saving And Opening A Full Parameter Configuration; Saving A Full Configuration Of Parameters In Online Mode - MarelliMotori D-Vo Light Manuel D'utilisation

7.6.

CREATING A PARAMETER CONFIGURATION OFFLINE

D-Vo allows to create a full D-Vo parameter configuration without an active connection with a D-Vo unit. The created
file can be saved in the PC drive and used later, after connection has been established with a D-Vo unit (see
Paragraph 7.7).
•
Start D-Vo Dashboard.
•
In the Menu Area select the File menu, then click on the New item. As an alternative, click on the
New shortcut.
•
Starting from the default configuration loaded into the main window, set the parameters according
to the desired configuration.
•
To save the configuration you created, see Paragraph 7.7.
7.7.

SAVING AND OPENING A FULL PARAMETER CONFIGURATION

D-Vo Dashboard allows to save in the PC a file containing the full set of the system parameters and to later open
it (and possibly upload it to a D-Vo unit).
This operation can be performed both ONLINE, that is with an active connection to a D-Vo unit, and OFFLINE, that
is without any D-Vo unit connected.

7.7.1. Saving a full configuration of parameters in ONLINE mode

•
Start D-Vo Dashboard.
•
Establish the connection with a D-Vo unit.
•
Set the desired configuration (and possibly upload it to the D-Vo unit).
•
To save the configuration on the PC, in the Menu Area select the File menu, then click on Save or
Save As. As an alternative, click on the Save shortcut.
•
The software shall then display a dialogue window allowing to assign a name to the file and to
select the drive folder in which you wish to save it.
9638571A0_C
D-Vo Light – Marelli Motori
EN 55