Establishing Communication With D-Vo - MarelliMotori D-Vo Light Manuel D'utilisation

7.4.

ESTABLISHING COMMUNICATION WITH D-VO

•
Connect the PC and D-Vo through an USB cable, as described in Paragraph 7.2.2.
•
Start D-Vo Dashboard.
•
From the Menu Area of the interface select the Communication menu, then click on the Configure
item:
•
The system shall display the following connection configuration window.
•
Select the USB Settings tab.
•
Click the update button
in the USB device field) to which D-Vo is connected through USB.
•
Check that in the Connection type field the USB item is selected.
•
Leave the other fields unchanged.
•
Click Apply.
•
D-Vo Dashboard is configured to start communication with D-Vo through USB. Click the
CONNECT button in the control panel (Paragraph 7.3.2) to start the communication with D-Vo.
NOTE: USB drivers for Windows® can be downloaded at the following link:
https://www.ftdichip.com/Drivers/VCP.htm
9638571A0_C
; D-Vo Dashboard shall search and select the PC COM port (displayed
D-Vo Light – Marelli Motori
EN 53