Applications - DBI SALA NANO-LOK 3500224 Manuel D'instructions

This product is part of a personal fall arrest, work positioning, or rescue system. The user must follow
EN
the manufacturer's instructions for each component of the system. These instructions must be provided
to the user of this equipment. The user must read and understand these instructions before using
this equipment. Manufacturer's instructions must be followed for proper use and maintenance of this
equipment. Alterations or misuse of this product or failure to follow instructions may result in serious
injury or death.
i
If you have questions on the use, care, or suitability of this equipment for your application, contact
Capital Safety.
i Before using this equipment, record the product identification information from the ID label and iSafe RFID
tag in the inspection and maintenance log of this manual.
GLOSSARY REFERENCES
Numbered Glossary References on the front cover of this instruction reference the following items:
1
User Instructions.
2
Nano-Lok™ Self Retracting Lanyards.
3
Model Numbers: (See Figure 1).
DeScRIptIon:
Figure 1 illustrates Nano-Lok Edge™ Self Retracting Lanyard (SRL) models covered by this instruction manual:
Nano-Lok Edge cable lifeline SRLs in model groups
m retracts within the SRL housing.
Nano-Lok Edge web lifeline SRLs in model groups
the SRL housing.
WrapBax™ SRLs model groups
last .91 m web section is used to attach to an anchorage.
SRL models A and B
SRL models C , D
,
2.10)
All Nano-Lok Edge SRL models are mounted just below the dorsal D-ring location of the user's full body harness. Models are
available in both single and twin SRL configurations which incorporate several snap hook, carabiner and WrapBax attachment
options. The SRLs include an integral energy absorber. The SRLs automatically lock at the onset of a fall to arrest the falling
worker, but pay out and retract during normal movement.
Figure 2 illustrates key components of Nano-Lok Edge SRLs:
G Harness Interface
H Housing
I Energy Absorber Cover

1.0 AppLIcAtIonS

1.1 PURPOSE: DBI/SALA Nano-Lok Edge SRLs with leading edge capability are designed for use in applications where
falls may occur, including falls over edges, such as roofing, leading edge construction, etc. SRLs are designed to be a
component in a personal fall arrest system (PFAS). SRLs may be used in many situations where a combination of worker
mobility and fall protection is required (i.e. inspection work, general construction, maintenance work, oil production,
confined space work, etc.). Twin Nano-Lok Edge models incorporate two SRL units that can be used for applications where
100% tie-off is required.
1.2 StANDARDS: Your Nano-Lok Edge SRL conforms to the CE standards identified on the front cover of these instructions.
1.3 tRAINING: This equipment is intended to be used by persons trained in its correct application and use. It is the
responsibility of the user to assure they are familiar with these instructions and are trained in the correct care and use
of this equipment. Users must be aware of the operating characteristics, application limits, and the consequences of
improper use.
2.0 LImItAtIonS & RequIRementS
Always consider the following limitations and requirements when installing or using this equipment:
2.1 CAPACItY: The DBI/SALA Nano-Lok SRL with Leading Edge capability is designed for use by one person with a combined
weight (person, clothing, tools, etc.) of up to 141 kg for all applications including Leading Edge.
At no time shall more than one person connect to a single SRL for fall arrest applications.
2.2 ARRESt FORCE: SRLs documented in this instruction meet the following Arrest Force values:
Average Arresting Force
Maximum Arresting Force
4
5
6
E F
and have a 2.74 m long web lifeline of which 2.12 m retracts within the SRL housing. The
meet the Type B Edge test requirements of the VG 11.54 revision 6 Standard. (See Section 2.10)
E and F meet the Type A Edge test requirements of the VG 11.60 revision 6 Standard. (See Section
J Cable Lifeline
K Cable Guide Bumper
L Snap Hook
4.0 kN
6.0 kN
Standards.
Number of body that performed CE test.
Number of body checking the manufacture of this PPE.
A and B contain 2.44 m long galvanized wire rope lifelines of which 1.82
C and D contain 2.44 m long web lifelines of which 1.82 m retracts within
M iSafe™ RFID Tag
N Hook and Loop Straps
O Web Lifeline
8
P WrapBax Lifeline Components
Q WrapBax Webbing
R WrapBax Snap Hook