Blackmagic Design Teranex Mini Mode D'emploi page 87

10 Optical Input and Output
Optical video input and output LC connectors via optional SMPTE compatible
SDI optical fiber module. The optical input automatically detects between
SD/HD/6G/12G-SDI. The optical output can be used as a loop through output.
11 L – Analog or AES/EBU
Balanced left channel analog audio, or digital AES/EBU audio output XLR connector.
12 R – Analog, AES/EBU or Timecode
Balanced right channel analog audio, or digital AES/EBU audio output XLR connector.
Can also be configured for timecode output.
Switches
Teranex Mini Optical to Audio 12G's switches provide the following settings:
Switch 8 – Analog Audio, AES/EBU Audio
Set switch 8 to OFF to select balanced analog audio, or to ON for digital AES/EBU audio output.
Switch 7 – Output Audio/Timecode
Set switch 7 to 'on' to output timecode via the R channel audio XLR connector. Set to 'off' to
output audio.
Switches 6, 5, 4 – SDI Audio De-Embed Bit 2, 1, 0
Switches 6, 5 and 4 are represented as bits 2, 1 and 0 respectively. This simply means that by
setting various on/off combinations for switches 6, 5 and 4, you can choose which audio
channels to de-embed from the SDI or optical input signal into your audio output.
The switch legend on the base of your converter gives you all the
information you need to change conversion settings.
Teranex Mini – Optical to Audio 12G 87