Blackmagic Design Teranex Mini Mode D'emploi page 80

Audio Output Menu
This menu allows you to select between analog, AES/EBU, and timecode audio outputs, as well
as which channels of your SDI audio input you wish to de-embed. You can also adjust the gain
on the audio output.
Your Teranex Mini will retain its last settings whether applied via switch, Smart Panel or Teranex
setup utility. If reverting to switch control after removing the Smart Panel or updating your
converter's settings via software, you may need to toggle individual switches for new settings to
take effect.
Teranex Mini Smart Panel Settings
If you have installed the optional Teranex Mini Smart Panel on your Optical to Analog 12G
converter, the following menus will be available – 'video,' 'audio,' and 'network.' The settings
available in these menus are identical to those detailed in the 'Blackmagic Teranex Setup
settings' section above. For more information on changing settings using the Teranex Mini
Smart Panel, refer to the 'changing settings' section in this manual.
Using Teranex Mini Smart Panel gives you access
to the same settings as Blackmagic Teranex Setup.
Teranex Mini Optical to Analog 12G Block Diagram
SDI In
Input automatically
detects between
SD/HD/6G/12G-SDI
Optical
Out/In
Central Processor
USB
and Firmware
Ethernet
Mini Switches
with Power
Equalizer, 10 bit HD to
Re-Clocker and SD Down
10 bit De-Serializer Converter
SDI Audio
De-Embedder
Analog or AES/EBU
Audio Out Switch
AES/EBU
Audio Sample Rate
Converter
Stereo Audio
Analog to Digital
Converter
12 Bit Digital to
Analog SD/HD
Video Converter
Component output can switch to
S-Video and Composite
Teranex Mini – Optical to Analog 12G
Left Analog Out
or AES/EBU
1+2 Out
Right Analog Out
or AES/EBU
3+4 Out or
Timecode
Y
R-Y
B-Y
80