Blackmagic Design Teranex Mini Mode D'emploi page 44

The 'audio' tab for Teranex Mini Analog to SDI 12G contains the following settings.
Adjust your video luminance and chroma levels
and component chroma levels using the 'video'
settings page in Blackmagic Teranex Setup.
Adjust your analog audio levels and AES/EBU
levels using the 'audio' settings page.
Audio Input Menu
This menu allows you to select between analog, AES/EBU, and timecode audio inputs, as well
as which channels of your SDI audio output you wish to embed these into. You can also adjust
the gain on the audio signal.
Selecting AES/EBU allows the additional option of checking 'sample rate conversion.' When
this is selected, the sample rate of your SDI audio output will be up- or down- converted to
24-bit, 48kHz.
Teranex Mini – Analog to SDI 12G 44