Blackmagic Design Teranex Mini Mode D'emploi page 40

Adjust your analog audio levels and AES/EBU levels using the 'audio' settings page.
Teranex Mini Smart Panel Settings
If you have installed the optional Teranex Mini Smart Panel on your SDI to Analog 12G converter,
the following menus will be available – 'video,' 'audio,' and 'network.' The settings available in
these menus are identical to those detailed in the 'Blackmagic Teranex Setup settings' section
above. For more information on changing settings using the Teranex Mini Smart Panel, refer to
the 'changing settings' section in this manual.
Using Teranex Mini Smart Panel gives you access to the same settings as Blackmagic Teranex Setup.
Teranex Mini – SDI to Analog 12G Block Diagram
Input automatically
detects between
SD/HD/6G/12G-SDI
SDI In
Central Processor
USB
and Firmware
Ethernet
Mini Switches
with Power
Equalizer, 10 bit HD to
Re-Clocker and SD Down
10 bit De-Serializer Converter
SDI Audio
De-Embedder
Automatic
SD/HD/6G/12G-SDI
Cable Driver
Analog or AES/EBU
Audio Out Switch
AES/EBU
Audio Sample Rate
Converter
Stereo Audio
Analog to Digital
Converter
12 Bit Digital to
Analog SD/HD
Video Converter
Component output can switch to
S-Video and Composite
Teranex Mini – SDI to Analog 12G
Loop SDI Out
Left Analog Out
or AES/EBU
1+2 Out
Right Analog Out
or AES/EBU
3+4 Out or
Timecode
Y
R-Y
B-Y
40