Blackmagic Design Teranex Mini Mode D'emploi page 16

Blackmagic Teranex Setup Settings
The Teranex setup utility can change all the same settings that are available using the front
panel, plus additional settings. You can access these settings by moving between the 'video',
'scopes', audio', 'configure' and 'about' tabs.
The 'about' and 'configure' tabs are detailed in the 'changing settings' section in this manual.
Blackmagic Teranex Setup lets you adjust settings such
as HDMI instant lock to instantly resync the video signal
when changing or routing sources, load 3D LUT files,
change the RCA analog audio output levels and more.
Video Output Menu
HDMI Output Range
This checkbox controls clipping of the HDMI output so it stays within HDMI legal levels and
should be kept on by default. Select 'normal' to set the HDMI output to legal limits.
HDMI Instant Lock
Select this checkbox to enable HDMI instant lock so changing sources using the same format is
clean and glitch free. When HDMI instant lock is enabled, the HDMI output signal is kept active
even when changing sources. This means your converter does not have to wait for the HDMI
television or monitor to lock before displaying the video output as the HDMI signal is already
locked. It's important to note that this feature only works when changing sources using the
same video standard.
The HDMI instant lock feature can introduce a small delay in video and audio, so if you need
zero delay in your converted output you can bypass the HDMI instant lock feature by
deselecting the checkbox.
33 Point 3D LUT
Your Teranex Mini SDI to HDMI 8K HDR supports .cube 3D LUT files that can be created in any
color correction software such as DaVinci Resolve. DaVinci Resolve can save color grades
as 3D LUTs.
You can load two separate 3D LUTs by clicking on the 'load' button for each 3D LUT slot,
selecting the desired .cube file from your computer, and clicking 'Open'. Click 'save' to confirm
your settings. The 3D LUT filename will appear above each 'load' button so you know which
3D LUT is being used for 3D LUT 1 or 3D LUT 2.
Teranex Mini – SDI to HDMI 8K HDR 16