SWM RS 300 R 2016 Manuel - Utilisation - Entretien page 96

ADJUSTING THE IDLE
Adjust the carburettor with warm engine and with
the throttle control in closed position. Proceed as
follows:
- turn the idle speed adjustment screw (1) on the
throttle body, located on the right-hand side of
the vehicle, until the idle speed of 1650 RPM is
reached (turn clockwise to increase the speed
and anticlockwise to reduce the speed).
1
EN - 26
ADJUSTING THE MANUAL DECOMPRESSOR CABLE
TENSION
In order to adjust the lever (1) decompressor free
play (approximately 3 mm- 0.12 in.), the lever holder
is provided with the adjuster (2); the adjustment
can be also effected with the tightener (3) on the
R.H. side of the engine (use this tightener if it is not
possible to obtain the correct free play with the ad-
juster on the handlebar).
2
1
3