SWM RS 300 R 2016 Manuel - Utilisation - Entretien page 82

4- SPEED / TRIP 1 / RPM (figure 4)
- SPEED: speed - maximum value: 299 kmh or 299
mph;
- TRIP 1: distance - maximum value: 999.9 km (the
data will be lost after detaching battery).
Resetting the STP 1 also resets the TRIP 1 and AVS
1 data.
The function TRIP 1 is ON together with the
function STP 1 (*).
- RPM: engine r.p.m. shown on the vertical bar in-
dicator.
(*): see figure 5
4
EN - 12
5- SPEED / STP 1 / RPM (figure 5)
- SPEED: speed - maximum value: 299 kmh or 299
mph;
- STP 1: miles/kilometres covered time
- Reading from 0:00 to 23:59:59 (the data will be
lost after detaching battery).
To activate the function STP 1, push the knob SCROLL
(A) for more than 3 seconds.
- pressing SCROLL (A) for more than three seconds,
the counter starts;
- pressing SCROLL (A) once only, the counter stops;
- pressing SCROLL (A) once only, the counter resets;
.............................
and so on
Note*:
STP 1 data + TRIP 1 data = AVS 1 (*).
- RPM: engine r.p.m. shown on the vertical bar in-
dicator.
(*): see figure 6
5
6- SPEED / AVS 1 / RPM (figure 6)
- SPEED: speed - maximum value: 299 kmh or 299
mph;
- AVS 1: shows the average speed for vehicle cov-
erage, distance data (TRIP 1) and covered time
(STP1) (the data will be lost after detaching bat-
tery).
Note*:
Resetting the STP 1 also resets the TRIP 1 and AVS
1 data.
- RPM: engine r.p.m. shown on the vertical bar in-
dicator.
6