Technical Data - Grizzly BRM 51 BSA Mode D'emploi

Technical data

Petrol lawn mower ................ BRM 51 BSA
Performance ..................................... 2.36 kW
Engine 4-stroke .........................................
Briggs & Stratton 625 Series
Engine size .......................................190 cm
Blade rotation speed ...................2800 min
Blade torque ....................................... 45 Nm
Wheel drive ......................................3.5 km/h
Petrol tank volume ................................. 1.0 l
Octane rating ........................................95-98
Engine oil tank volume ......................600 ml
Motoroil ........................................HD SAE 30
Spark plug ......................Champion RJ19LM
Cutting circle .....................................510 mm
Cutting height ...............10-steps, 25-75 mm
Grass collection box volume ................. 60 l
Weight ................................................34.4 kg
Sound pressure level
(L
) .........................85.2 dB(A); K=3.0 dB(A)
pA
Sound power level (L
measured ................93.7 dB(A); K =3.6 dB(A)
guaranteed...................................... 98 dB(A)
Vibration (a )
n
at the handle ........... 5.869 m/s
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
)
WA
; K=1.5 m/s
2
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
(all parts of the operating cycle are to be
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
3
running idle).
-1
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
2
UK
87