Technical Data - Grizzly BRM 51-163 BSA InStart Traduction De La Notice D'utilisation Originale

Technical data

Petrol
lawn mower ....... BRM 51-163 BSA InStart
Performance P ...................................2.6 kW
Engine ...... Briggs & Stratton 675 IS instart
Engine size V ...................................163 cm
Blade rotation speed n
Blade torque ....................................... 45 Nm
Wheel drive ............................approx. 3 km/h
Petrol tank volume .....................................1 l
Octane rating ........................................95-98
Engine oil tank volume ...................... 470 ml
Motoroil .....................HD SAE 30 or 10W-30
Spark plug .................... Champion XC92YC
Cutting width .....................................510 mm
Cutting height ...............10-steps, 25-75 mm
Grass collection box volume ..................60 l
Weight m ............................................ 34.5 kg
Sound pressure level
(L ) .............................83.2 dB(A); K= 2.5 dB
pA
Sound power level (L
measured .................95.6 dB(A); K= 2.03 dB
guaranteed.......................................98 dB(A)
Vibration (a ) ............ 10.30 m/s
h
Battery (Li-Ion) ..................IS12B-593560
Nominal voltage ..........................10.8 V
Capacity.........................................1.45 Ah
Energy ..........................................15.7 Wh
Charging time .......................... approx. 1 h
Charger ..............................IS12C-593562
Uptake voltage/
Input..............100-240 V~, 50/60 Hz, 0.8 A
Voltage output/
Output. ................................12.45 V
Protection class ..................................
Protection category............................ IPX0
............... 2800 min
0
)
WA
; K=1.5 m/s
2
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
3
ences and information of this instruction
-1
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
2
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under actu-
al usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
2 A
II
GB
113