Safety Equipment; Technical Data - Grizzly BRM 56-163 BSA Q-360 Notice D'utilisation

Safety Equipment

3 Safety catch
The equipment stops when the
safety catch is released.
6 Impact protection
protect the operator from parts
that are flung out and from ac-
cidentally touching the blades
when mowing with no grass col-
lection box.
10 Exhaust guard
prevents hands or combustible
materials from coming into con-
tact with a hot exhaust
15 Lateral ejection with impact
protection
prevents the lateral ejection of
lawn cuttings and solid parts and
strings up the lawn cuttings from
the side.

Technical data

Petrol mower ............................................
...........................BRM 56-163 BSA Q-360°
Performance .................................2.64 kW
Engine 4-stroke .........................................
............. Briggs & Stratton 675IS INSTART
Engine size ...................................163 cm
Blade rotation speed n
Blade torque .......................... max. 45 Nm
Wheel drive.......................... aprox. 3 km/h
Petrol tank volume .............................. 1.0 l
Octane rating ....................................95-98
Engine oil tank volume ................... 470 ml
Motoroil .................. HD SAE 30 or 10W-30
Spark plug ...................Champion XC92YC
Cutting width .................................560 mm
Cutting height ..............6-steps, 25-75 mm
Grass collection box volume................ 75 l
Weight ...........................................37.6 kg
Sound pressure level
(L ) ...................... 83,3 dB (A), K
pA
............ 2900 min
0
=2,5 dB
pA
Sound power level (L
measured.......... 97.58 dB (A); K
guaranteed ..................................98 dB(A)
Vibration (a )
h
at the left handle .... 6.185 m/s
at the right handle .. 6.862 m/s
Battery (Li-Ion) ..................IS12B-593560
Nominal voltage ......................... 10.8 V
Capacity.........................................1.45 Ah
Energy ......................................... 15.7 Wh
Charging time ..........................approx. 1 h
Charger ..............................IS12C-593562
Uptake voltage/
Input..............100-240 V~, 50/60 Hz, 0.8 A
Voltage output/
Output. ............................... 12.45 V
Protection class ..................................
Protection category............................ IPX0
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
3
of the power tool from the stated
-1
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protecting the
user should be based on estimated expo-
sure under actual usage conditions (all parts
of the operating cycle are to be considered,
including, for example, times during which
the power tool is turned off and times when
the tool is turned on but is running idle).
Noise and vibration values were determined
according to the standards and stipulations
mentioned in the declaration of conformity.
GB
)
WA
=0.91 dB
WA
; K=1.5 m/s
2
; K=1.5 m/s
2
2 A
2
2
II
91