Replacement Parts/Accessories; Technical Data - Grizzly BRM 46-141 AT-OHV Traduction De La Notice D'utilisation Originale

GB
Replacement parts/
Accessories
Spare parts and accessories
can be obtained at
www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre (see "Grizzly
Service-Center"). Please have the order
number mentioned below ready.
Replacement blade ................... 13700412
Handle above ............................ 91103766
Handle below ............................. 91103767
Quick-release lever
assembly set.............................. 91103762
Control cable ............................. 91103771
Grass collection box .................. 91103763
Rear wheels............................... 91103760
Front wheel ................................ 91103761
V-belt ......................................... 89410014
If further spare parts should be neces-
sary, please find the part number on the
exploded drawing.
90

Technical data

Petrol lawn mower .. BRM 46-141 AT-OHV
Performance ..........................................2 kW
Engine ............... Zongshen General Power
..............................................Machine XP 140
Engine size .......................................141 cm
Blade rotation speed n
Blade torque .............................. max. 45 Nm
Wheel drive ................................... ca. 3 km/h
Petrol tank volume ..................................0,8 l
Octane rating ........................................95-98
Engine oil tank volume ...................... 550 ml
Motoroil .....................HD SAE 30 or 10W-30
Spark plug .........Torch F6RTC or LG F6RTC
Cutting width .....................................460 mm
Cutting height .................6-steps, 25-75 mm
Grass collection box volume ..................60 l
Weight ................................................ 27,9 kg
Sound pressure level
(L ) ..............................82,9 dB(A); K=2,5 dB
pA
Sound power level (L
measured ..................94,6 dB(A); K=1,46 dB
guaranteed.......................................96 dB(A)
Vibration (a ) at handle
h
left ..........................5,855 m/s
right........................6,841 m/s
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
............... 2900 min
0
)
WA
; K=1,5 m/s
2
; K=1,5 m/s
2
3
-1
2
2