Summary; Safety Equipment; Delivery Contents; Initial Operation - Grizzly BRM 51 BSA Mode D'emploi

Summary

1 Upper handle bar
2 Drive catch
3 Safety catch
4 Lower handle bar
5 2 Cable clamps
6 Impact protection
7 Oil filler cap with dipstick
8 Filler cap
9 Engine cover
10 Exhaust guard
11 Spark plug connector with
spark plug
12 2 front wheels
13 Petrol pump (primer)
14 Air filter (not visible)
15 Air filter cover
16 Sheet steel housing
17 2 rear wheels
18 Lever for cutting height adjust-
ment
19 Grass collection box (two parts)
20 2 Locking lever to fix bar
21 Starter cord guide
22 Starter handle with starter cord
23 Gas lever

Safety Equipment

3 Safety catch
The equipment stops when the
safety catch is released.
6 Impact protection
protect the operator from parts
that are flung out and from ac-
cidentally touching the blades
when mowing with no grass col-
lection box.
10 Exhaust guard
prevents hands or combustible
materials from coming into con-
tact with a hot exhaust

Delivery Contents

Carefully unpack the appliance and check
that it is complete:
- Petrol lawn mower (pre-assembled)
- Collapsed handle bar
- Grass collection box
- 2 cable clamps
- Assembly accessories for fixing the
bar (at bar mounting)
- Spark plug wrench
- Operating instructions
- Briggs & Stratton operating instruc-
tions

Initial Operation

Caution! Risk of injury from
rotating blades. Carry out work
on the equipment only when the
blade is switched off and sta-
tionary.
Observe the Briggs & Stratton in-
struction manual supplied.
Before starting the equipment, you must
- Remove the Protective Caps
- Install the handle bar
- Install the grass collection box
- Install the starter cord
- Fill with engine oil
- Fill with petrol
- adjust cutting height if required

Installing the Handle Bar

Caution! When installing
the handle bar, ensure that
the Bowden cables are not
squashed.
UK
79