General Description; Functional Description - Grizzly BRM 51 BSA Mode D'emploi

UK
- Before releasing blockages or re-
moving obstructions in the ejection
channel;
- Before checking, cleaning or working
on the equipment;
- If a foreign body is struck. Look for
damage to the equipment and carry
out the necessary repairs before re-
starting and working with the equip-
ment;
- If the equipment starts to vibrate un-
usually strongly, an immediate check
is required.
• Switch off the engine
- When leaving the equipment;
- Before refuelling;
• Close the throttle valve when stopping
the engine.
• Do not leave the equipment unattend-
ed in the workplace.
• Do not work with equipment that is
damaged or incomplete or has been
converted without the approval of the
manufacturer.
Using machines for applications other
than those intended may result in dan-
gerous situations.
Maintenance and Storage:
• Ensure that all nuts, bolts and screws
are tightened firmly and the equipment
is in safe working condition. Many acci-
dents are caused by poorly maintained
equipment.
• Do not keep the equipment with petrol
in the tank inside a building in which
petrol fumes could potentially come
into contact with open fire or sparks.
• Allow the engine to cool before plac-
ing the equipment in enclosed spaces.
Risk of fire.
• To avoid the risk of fire, keep the en-
gine, exhaust and area around the fuel
tank free of grass, leaves or leaking
78
grease (oil).
• Check the grass catcher regularly for
wear or loss of function.
• For reasons of safety, replace worn
or damaged parts. Replace defective
silencers.
• If the fuel tank is to be drained, do this
outdoors.
• Handle your equipment with care.
Keep the tools sharp and clean to ena-
ble you to work better and more safely.
Follow the maintenance directions.
• Do not attempt to repair the equipment
yourself unless you are trained to do
so. Any work not specified in these
instructions is to be carried out only by
customer service centres authorised
by us.
• Keep the equipment in a dry place and
out of reach of children. Machines are
dangerous if used by inexperienced
people.

General Description

The illustration of the principal
functioning parts can be found on
pages 2 - 4.

Functional Description

The equipment is driven by a powerful
four-stroke engine (Briggs & Stratton 625
Series). The Easy-Start function, the rear
wheel drive and the blade braking function
make the equipment easier to operate.
The equipment is fitted with a high qual-
ity steel metal casing, a grass catchment
basket and a foldable handlebar. In ad-
dition, the height of the equipment can
be adjusted in 10 levels and has easy-
moving wheels.
Refer to the following descriptions for a
functional description of the controls