Repair Service; Replacement Parts/Accessories; Technical Data - Grizzly EV 1200-31 ZV Traduction De La Notice D'utilisation Originale

Repair Service

• Repairs that are not subject to this guar-
antee can be carried out by our Service
Center against a corresponding charge.
Our Service Center will be happy to sub-
mit a cost estimate.
We can only deal with implements that
have been adequately packed and car-
riage paid.
Implements dispatched by unpaid
•
carriage – as bulky goods, by ex-
press or other special freight forms
– will not be accepted.
• We will dispose of your implements free
of charge
Replacement parts/
Accessories
Spare parts and accessories
can be obtained at
www.grizzly-service.eu.
If you do not have internet access, please
contact the Service Centre (see "Grizzly
Sercice-Center"). Please have the order
number mentioned below ready.
Scarifier drum .......................... 91099291
Aerator drum............................. 91099293
Collection bag ........................... 91099271

Technical data

Electric Scarifier ............ EV 1201-31 ZV
Motor input.................................... 1200 W
Rated voltage ............. 220-240 V~, 50 Hz
Protection Class ................................
Degree of protection ..........................IPX4
Working width
Aerator drum .......................max. 31 cm
Scarifier drum ......................max. 31 cm
Working depth ....................max. 10 mm
Weight (without collection bag) ........8,6 kg
Acoustic pressure level
(L ) .......................80 dB(A); K
pA
Sound power level (L
measured ..............96 dB(A); K
guaranteed ............................ 102 dB(A)
Vibration at the handle
(a ) .....................4,12 m/s
h
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool
is turned on but is running idle).
The noise and vibration values have been
determined in accordance with the stand-
ards and regulations specified in the dec-
laration of conformity.
Technical and visual modifications may
be made without notice in the course
II of further development. All dimensions,
information and specifications in these
operating instructions are therefore not
guaranteed. As such, no assertion of legal
claims can be enforced on the basis of the
operating instructions.
GB
= 3 dB
pA
)
WA
= 3 dB
WA
; K = 1,5 m/s
2 2
55