Table des Matières
Publicité
CHAPITRE I
Instructions de montage des plaques warning
2.9929.699.0 -
Modifications à la struc-
ture "ROPS"
(pour tracteurs équipés d'un arceau de sécurité)
Appliquer sur l'arceau
de sécurité
2.9929.853.0 -
Vitesses de rotation
maximales admissibles
de la prise de force
2.9929.848.0/10 -
Plaque d'attention
Installer les plaques
comme le montre la
figure, sur le garde-boue
gauche (plate-forme).
CAUTION
2.9929.854.0 -
By-pass starting Monter
sur le démarreur en un
emplacement permettant
de le lire.
SECURITETY/ETIQUETTES/SYMBOLES
Keep all shields, covers and
To avoid injury
guards in place and stay away
Read the Operators Instruction
from moving parts while engine
Book for safety information
is running.
and operating instructions.
Place transmission shift lever
Fasten your seat belt before
in neutral and apply parking
tractor operation.
brake before using external
3-point hitch controls.
Start engine only when seated
in operator's seat.
Apply parking brake, lower
Make sure everyone is clear of
equipment, stop engine and
tractor and equipment before
remove key before leaving the
tractor unattended.
starting engine or operation.
W
ARNING
Modifications, alterations
to ROPS or use of ROPS if
demaged, is prohibited.
2.9929.699.0
2.9929.853.0
Wait for all movement to stop
before servicing tractor or equipment.
Securely support or block lifted
implement which must be in
the raised position for
servicing or adjustement.
Couple brake pedals together
for road travel.
Use flashing warning lights and
SMV emblem when on public roads,
except where prohibited by law.
Always drive with care and attention.
3814211M2
2.9929.848.0/10
XLV
Publicité
Table des Matières
