Lateral Grass Ejection; Installing The Starter Cord; Filling With Engine Oil And Checking The Oil Level; Filling With Petrol - Grizzly BRM 51-159 A-OHV Quattro Traduction De La Notice D'utilisation Originale

UK
Mulch kit
Prior to using the mulch kit, the
lateral ejection canal has to be re-
moved. (see
Attaching mulch kit
1. Remove the collection box
( 19), if used.
2. Lift the impact protection (6).
3. Insert the mulch kit (23). The
red locking button clicks into
place.
Remove mulch kit
4. Lift the impact protection (6).
5. Insert the red locking button
downwards and remove the
mulch kit (23).

Lateral grass ejection

Before using the lateral grass
ejection, the mulch kit (
has to be inserted and the grass
collection box (
removed.
Install lateral ejection canal
1. Lift the lateral impact protection
(15).
2. Mount the lateral ejection chan-
nel (24) and remove the lateral
impact protection (15). It holds
the side ejection channel (24) in
position.

Installing the Starter Cord

1. Pull the safety catch (3) towards
the handle bar (1) and hold it.
2. Slowly pull the starter cord on
the starter handle (22) towards
84
)
23)
19) has to be
the bar and hook the starter
cord into the starter cord guide
(21).
3. Release the safety catch (3).
Filling with Engine Oil and
Checking the Oil Level
Place the equipment on a level
base.
1. Unscrew the oil filler cap and dipstick
( 7) and pour oil into the tank. The
oil tank holds 0.5 l oil. Use brand oil
(e.g. SAE 30).
2. To check the oil level, wipe the dip-
stick on a clean cloth and replace it in
the tank until it stops.
3. After pulling it out, read off the
oil level on the dipstick. The oil
level should be in the marked
area between the minimum and
maximum marks.
4. Wipe off any spilt oil and close
the oil filler cap (
Check the oil level every time be-
fore mowing and add oil when the
lower marking point is reached.

Filling with Petrol

Warning! Petrol is flammable
and hazardous to health:
- Keep petrol in containers intended for
this purpose;
- Only refuel outdoors and never with
the engine running or when the ma-
chine is hot;
- Open the filler cap carefully to allow
excess pressure to escape;
- Do not smoke whilst refuelling;
- Avoid skin contact and inhalation of
the fumes;
7).