Lateral grass ejection
Before using the lateral grass
ejection, the mulching kit (
24) has to be inserted and the
grass catchment basket (
has to be removed.
Install lateral ejection canal
1. Lift the shock protection on the
side (15).
2. Mount the lateral ejection canal
(25) and take off the lateral shock
protection (15). It holds the lat-
eral ejection canal in position.
Installing the Starter Cord
1. Pull the safety catch (3) towards
the handle bar (1) and hold it.
2. Slowly pull the starter cord on
the starter handle (22) towards
the bar and hook the starter cord
into the starter cord guide (21).
3. Release the safety catch (3).
Filling with Engine Oil and
Checking the Oil Level
Place the equipment on a level base.
1. Unscrew the oil filler cap and dipstick
(
7) and pour oil into the tank. The
oil tank holds 0.6 l oil. Use brand oil
(e.g. SAE 30).
2. To check the oil level, wipe the dip-
stick on a clean cloth and replace it in
the tank until it stops.
3. After pulling it out, read off the
oil level on the dipstick. The oil
level should be in the marked
area between the minimum and
maximum marks.
4. Wipe off any spilt oil and close the oil
filler cap (
Check the oil level every time be-
fore mowing and add oil when the
19)
lower marking point is reached.
Filling with Petrol
Warning! Petrol is flammable
and hazardous to health:
- Keep petrol in containers in-
tended for this purpose;
- Only refuel outdoors and never
with the engine running or when
the machine is hot;
- Open the filler cap carefully to al-
low excess pressure to escape;
- Do not smoke whilst refuelling;
- Avoid skin contact and inhala-
tion of the fumes;
- Remove spilt petrol;
- Keep petrol away from sparks,
open flames and other ignition
sources;
- Do not use petrol/oil mixtures;
- Use normal or super unleaded
petrol;
- Only use clean, fresh petrol;
- Do not store petrol for longer
than one month, as its quality
deteriorates.
1. Unscrew the filler cap (
pour in the petrol to the lower edge of
the filler.
Do not fill the tank entirely, to allow
the petrol room to expand.
2. Wipe away petrol residues around the
filler cap and close the filler cap.
7).
8) and
UK
85