Mulch Kit; Lateral Grass Ejection; Installing The Starter Cord; Filling With Engine Oil And Checking The Oil Level - Grizzly BRM 51-150 BSAT Traduction De La Notice D'utilisation Originale

Dismantling/Empty out the
Grass Collection Box:
6. Lift the impact protection (6) and
remove the grass collection box
(19)
7. Empty catchment basket (see
chapter „Disposal / Environmen-
tal Protection") and re-install it.

Mulch kit

Prior to using the mulch kit, the
lateral ejection canal has to be re-
moved. (see
Attaching mulch kit
1. Remove the collection box
( 19), if used.
2. Lift the impact protection (6).
3. Insert the locking button down-
wards and insert the mulching
kit (23). The locking button
clicks into place.
Remove mulch kit
4. Lift the impact protection (6).
5. Insert the locking button down-
wards and remove the mulch kit
(23).

Lateral grass ejection

Before using the lateral grass
ejection, the mulch kit (
has to be inserted and the grass
collection box (
removed.
Install lateral ejection canal
1. Unlock the lateral impact protec-
tion (15) by pulling the locking
element (15a) to the left and
opening the lateral impact pro-
tection (15).
2. Mount the lateral ejection chan-
nel (24) and remove the lateral
)
23)
19) has to be
impact protection (15). It holds
the side ejection channel (24) in
position.

Installing the Starter Cord

1. Pull the safety catch (3) towards
the handle bar (1) and hold it.
2. Slowly pull the starter cord on
the starter handle (22) towards
the bar and hook the starter cord
into the starter cord guide (21).
3. Release the safety catch (3).
Filling with Engine Oil and
Checking the Oil Level
Place the equipment on a level
base.
1. Unscrew the oil filler cap and dipstick
( 7) and pour oil into the tank. The
oil tank holds 0.47/0.6 l oil. Use brand
oil (e.g. SAE 30).
2. To check the oil level, wipe the dip-
stick on a clean cloth and replace it in
the tank until it stops.
3. After pulling it out, read off the
oil level on the dipstick. The oil
level should be in the marked
area between the minimum and
maximum marks.
4. Wipe off any spilt oil and close
the oil filler cap (
Check the oil level every time be-
fore mowing and add oil when the
lower marking point is reached.

Filling with Petrol

Warning! Petrol is flammable
and hazardous to health:
- Keep petrol in containers intended for
this purpose;
GB
7).
87