SICK T&D PBS Mode D'emploi page 29

Operating Instructions
Mechanical connection
When mounting the instrument, ensure that the sealing faces of the instrument and the
„
measuring point are clean and undamaged.
Screw in or unscrew the instrument only via the flats using a suitable tool and the
„
prescribed torque. The appropriate torque depends on the dimension of the pressure
connection and on the sealing element used (shape/material). Do not use the case as
working surface for screwing in or unscrewing the instrument.
When screwing the transmitter in, ensure that the threads are not jammed.
„
8013154/U275/2010/02/01
7. Starting, operation
Product label (example)
© SICK AG • Germany • All rights reserved • Subject to change without notice
Part-No.
Serial-No.
PBS
29