Power Supply - Stiebel Eltron SunWarmth CIR 150-1 I Mode D'emploi

INSTALLATION
INSTALLATION
Mounting Bracket for CIR 150-1 I and CIR 150-1 O
4 5/16
(11.0 cm)
1 5/8
(4.2 cm)
1 1/4
(3.2 cm)
Mounting Bracket for CIR 200-2 O
2 15/16
(7.5 cm)
1 5/8
(4.2 cm)
1 1/4
(3.2 cm)
8 |SUNWARMTH ™ CIR INFRARED HEATER
1/2
3 1/8
(1.3 cm)
(8 cm)
3-Ø13mm
8
(20.3 cm)
2 1/2
(6.3 cm)
Ø8.5 mm
M8
3 1/8
1/2
(8 cm)
(1.3 cm)
3-Ø13 mm
6 5/8
(16.8 cm)
M8
Ø8.5 mm
Mounting Bracket for CIR 400-2 O
13 3/16 1 9/16 1 9/16
(9.7 cm) (4 cm) (4 cm)
7 1/2
(19 cm)
Ø8 mm
1 Attach the heater bracket to the mounting bracket (outermost
hole), using the bolt, lock washer and nut supplied. Tighten
securely.
2 The bracket attached to the top of the heater allows rotation
up to 45° on the short axis by loosening the attachment bolt.
3 Once heater position is established, tighten all nuts and bolts
at mounting and heater bracket connections to maintain the
heater in a secure and stable position.
4 Read and follow all warnings, and the following section on
Operation to enjoy safe operation of the heater.
9.6

Power supply

DANGER: Electrocution!
Carry out all electrical connection and installation
work in accordance with all national, state and local
building code.
DANGER: Electrocution!
Each 240 V heater must be wired directly to a circuit
with a timer switch and the proper size breaker and
wire gauge.
1/2
(1.3 cm)
1 1/4
8
(3.2 cm)
WWW.STIEBEL-ELTRON-USA.COM
M8
8 mm