Raise / Lower Brush Deck; Floor Tool Transit Bracket - Numatic CRG 8055/100T Notice Originale

Machine Set-up Guide
!
Always ensure that the machine is switched off before making any adjustments.
Raise Brush Deck / Fitting the Brush / Lower Brush Deck
12
Raise brush deck.
Brush in place.
Switch machine on.
To disengage the brush, press the brush engage button with the brush deck in the
raised position.
NOTE: Do not lift the brush deck until the brush has stopped revolving or the
brush will release.
Make sure you raise the brush deck before driving to the cleaning site.
Safety Gloves are recommended for the changing of used brushes.

Floor Tool Transit Bracket

When in transit, the floor tool can be placed on the bracket at the rear of the machine.
Simply slot the retaining knob into the bracket.
12
www.numatic.co.uk
Brush deck raised position.
10
Lower brush deck.
Press brush engage button.
CRG 8072
Twin Brush
Slide brush under machine.
11
Brush deck lowered.
Machine has picked up the brush.
!