"Automatic Washing" Mode; Important - Angelo Po FX 82 E3T Manuel D'utilisation Et D'installation

"AUTOMATIC WASHING" MODE

Proceed as follows.
1 – Select the "automatic washing" function using the
knob.
2 – Press the button to confirm the value or descrip-
tion selected.
The display will show page.
The page is used to sele ct the type of pr ogram for
cleaning of the appliance.

Important

Whenever the cooking mode is c hanged, clean
the chamber thoroughly.
3 – Check that there is at least 1 litre of the cleaning
products (cleaner and sanitizing agent) in each of the
respective tanks.
4 – Select the washing cycle required using the knob.
5 – Press button to start the washing cycle.
Table of cleaning programs
Programs
Standard cleaning Cleaning program recommended for dealing with very stubborn residues (e.g.: after
convection cooking of meat with high fat content, such as chickens, roasts, etc.)
Medium cleaning Cleaning program recommended for dealing with stubborn residues (e.g.: after con-
vection cooking of meat and/or fish).
Basic cleaning
Cleaning program recommended for dealing with easily removed residues (e.g.: after
mixed or convection cooking up to 150°C).
Soft cleaning
Cleaning program recommended for removing small amounts of residue (e.g.: after
steam cooking)
Descaling For removing limescale deposits from the cooking chamber.
Short splash rinse For rinsing the cooking chamber without using detergent.
cycle and TMC long
rinse cycle
English
>>>
>>>
>>>
Washing
programs
Lavaggio.tif
>>>
>>>
Description
- 35 -
automatic cleaning
Time
standard cleaning
medium cleaning
basic cleaning
soft cleaning
De-scaling
semi-automatic washing
TMC long rinse cycle
short splash rinse cycle
enable water
enable ECO
drain cleaning
standard cleaning
Use and installation manual
IT
GB
DE
FR
ES