Programming The Remote Controls; Adding A Remote Control; Deleting A Remote Control - SOMFY FREEVIA Mode D'emploi

5

PROGRAMMING THE REMOTE CONTROLS

5.1 Adding a remote control

1
• Press the
the control electronics
for 2 seconds.
The indicator light
comes on.

5.2 Deleting a remote control

See "Clearing the settings" page 18.
16
EN - Replacing the FREEVIA electronics unit - SOMFY
2
>2s
• Position the remote
button on
control to be
programmed on the
control electronics
target.
3
• Briefly press the button on the remote
control to be programmed. The "RADIO"
indicator light will come on then go out
when you release the button on the remote
control.
Complete opening is programmed on
this button.
<0,5s