Agilent Technologies Turbo-V 301-AG Notice De Mode D'emploi page 263




Turbo-V 301-AG Rack Controller User Manual / 87-900-982-01 (I)
TEMPERATURE: the temperature of the pump is shown

PRESSURE: the pressure read by the gauge is shown.

START OUT MODE: Selects the operating mode of the START
output. Possible options:
RUNNING: the output is active when the pump is driven

STARTING: the output is active only during acceleration

ramp-up.
SPEED OUT MODE (KRPM/Hz): permits selection of the unit of
measurement of the speed of rotation shown on the display of the
controller.
This setting acts only on the measurement shown on the display.
Possible options:
KRPM

Hz

LCD CONTRAST
Technical Information
Programming
263/294
17