Agilent Technologies Turbo-V 301-AG Notice De Mode D'emploi page 217

All the logic output from the controller must be connected at P2
mating connector. The following table describes the signals available
on the connector.
The following figure shows a typical logic output connection (relay
coil) but any other device may be connected e.g. a LED, a computer,
etc., and the related simplified circuit of the controller.
Figure 12
Figure 13
Turbo-V 301-AG Rack Controller User Manual / 87-900-982-01 (I)
Minimum 1 kΩ
Digital Output Connection Example
Minimum 100 kΩ
Analog Output Connection Example
Technical Information
Controller Connection
J 1
1
2
17
+24 V
217/294