Controller Outline - Agilent Technologies Turbo-V 301-AG Notice De Mode D'emploi

17 Technical Information

Controller Outline

Controller Outline

The outline dimensions for the Turbo-V 301 Rack Controllers are
shown in the following figure.
The Turbo-V controller can be used as a bench unit or as a rack module, but it
NOTE
must be positioned so that free air can flow through the holes.
Figure 5
212/294
1.5 [0.06]
244.0 [9.61]
Controller outline
Turbo-V 301-AG Rack Controller User Manual / 87-900-982-01 (I)
9.4 [0.37]
Dimensions: mm [inches]
106.4 [4.19]
91.4 [3.60]
= =
LS R1
AG R2
VACUUM TECHNOLOGIES
COUNTERS MEASURES
increase next
menu
previous
decrease
LOW SPEED START/STOP
Turbo-V 301-AG