Selecting The File Format; Downloading All Reports; Downloading By Commission Number, Date Or Report Range - Hürner HST 300 Print+ 2.0 Manuel Utilisateur

Before transferring data, it is highly recommended
to switch the welding unit off and on again. If this
fails to happens, there is a risk of data transfer
Important
failure, or reports in the welding unit may be cor-
rupted.
When transferring welding reports to a USB stick,
always be sure to wait until the display shows the
"Download finished" message before you discon-
Important
nect the USB stick from the product. If you discon-
nect it too early, the unit may ask you whether you
want to delete the reports in memory, although
they were not properly transferred. In this case,
if you delete the contents of the report memory,
the welding reports would be irrevocably lost and
would not be available elsewhere either.

8.1 Selecting the File Format

Connecting the storage media causes the the screen to
appear in which the format of the output file with the
welding reports can be selected: a PDF file with an ab-
stracted or extended version of the report, the format of
the welding data management application DataWork or
a CSV file. Using the ñ and ò arrow keys, select the file
type you need and confirm your selection by pressing the
START/SET key.
The CSV format enables import of the report data into
a database or spreadsheet application, provided this ap-
plication can read the format; this is the case, e.g., with
Microsoft Excel.
The Service Report option is not important for normal
operation. In the scope of computer-assisted unit service,
this report lists the events related to the maintenance of
the welding unit.

8.2 Downloading All Reports

After the file type was selected, the next screen offers a
"Print All Reports" option. Selecting it will download all
welding reports currently in system memory in the previ-
ously selected file format.
8.3 Downloading by Commission Number, Date or
Report Range
After the file type was selected, the next screen offers a
"By Commission Number," a "By Date Range," and a "By
Report Range" options. Depending on the selection, the ñ
18
EN
HÜRNER HST 300 Print + 2.0 User's Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
* Select File Type *
DataWork File
>PDF Abstract
PDF Ext'd Report
Version August 2016
Display 16