Publicité
Les langues disponibles
Les langues disponibles
O V E R L O A D - P R O T E C T I O N
Warning:
Please do not attempt to use the blender while all control lights are flashing
simultaneously.
If the motor of the Solis Twist and Mix Blender Pro is overloaded, the motor will
automatically shut down to protect itself. All control lights will flash on the con-
trol panel.
Deactivate the appliance with the ON | OFF button, pull the plug and wait 15 minu-
tes to let the motor cool down. Plug the power plug back into the socket and press
the ON | OFF button another time. When the motor has cooled down, the con-
trol lights won't flash any more and you can continue using the blender as des-
cribed in this manual.
Caution: Only after the control lights have stopped flashing, you shall continue
blending.
80
Publicité
