Télécharger Imprimer la page

Operation; Operation By Pc/Laptop Via Simatic Pdm Interface - Siemens SIPAN 32 Instructions De Service

Masquer les pouces Voir aussi pour SIPAN 32:

Publicité

Les langues disponibles

Les langues disponibles

4.8.7

Operation

4.8.7.1

Operation by PC/Laptop via SIMATIC PDM Interface

4.8.7.1.1
4.8.7.1.2
Dispositif de mesure de conductivité SIPAN 32
C79000-B5477-C045-02
MPIP sarl - 94, rue Mohamed Tounsi - 16013 - ROUIBA - ALGERIE
Tél./Fax : 021 81 11 22 - GSM : 070 91 75 15 ou 072 900 654 - E-mail : mpip@mpi-dz.com
Recommended equipment
IBM compatibility
S
Processor 80486 (or higher),
S
At least 32 MByte RAM,
S
Hard disk with 70 MB required,
S
VGA graphic card and monitor,
S
CD--ROM drive,
S
3,5"--diskette drive,
S
Keyboard and mouse (optional) supported by MS--Windows,
S
Printer optional,
S
Connection CP5411 or CP5511 or CP5611,
S
Operating system Windows 95 or Windows NT,
S
SIMATIC PDM, STEP7
Operation/control via control system
For the connection setup to the field devices the control system
requires the device--specific device data file GSD. The basic data of the
Siemens devices are already stored in the Siemens control system
SIMATIC PCS7.
If the GSD is required for other systems, this can be called as follows:
Either through the Interface Center in Fuerth
S
Mailbox +49 911 737972 or +49 911 97350
or through the Internet address
S
http://www.ad.siemens.de/csi_e/gsd
In addition, the current device data file GSD for printing is contained in
the section 4.8.16 "GSD (device data file)".
Mise en service et fonctionnement
4-47

Publicité

Chapitres

loading

Ce manuel est également adapté pour:

Sipan 32x