Publicité
Les langues disponibles
Les langues disponibles
Mise en service et fonctionnement
4.7.2
Online
4.7.2.1
Cond[1]
4.7.2.2
A0[1]
4.7.2.3 Configure
4.7.2.3.1
4.7.2.3.1.1
4.7.2.3.1.2
4.7.2.3.1.3
4.7.2.3.1.4
4.7.2.3.2
4.7.2.3.2.1
4.7.2.3.2.2
4.7.2.3.2.3
4.7.2.3.2.4
4.7.2.3.2.5
4.7.2.3.2.6
4-32
MPIP sarl - 94, rue Mohamed Tounsi - 16013 - ROUIBA - ALGERIE
Tél./Fax : 021 81 11 22 - GSM : 070 91 75 15 ou 072 900 654 - E-mail : mpip@mpi-dz.com
Displays measurement value 1 (conductivity).
Displays the current from analog output 1 in mA.
In this menu, the present settings can be viewed and, when necessary,
changed.
Process variables
Here the current measurement values, the set limits, and any possible
warnings are displayed.
Hold
Displays whether the current measurement value is frozen (Off or On).
Cond1[1]
Measurement value 1 = conductivity.
Temp
Current temperature value.
Limit
Displays the selected limits.
Analog output
Displays the present current, the current characteristic, the set 4, 12,
and 20 mA values, and the time parameter from analog output 1.
A0[1]
The current at analog output 1 in mA.
Xfer fnctn[1]
Displays whether the current characteristic is linear or bilinear.
4 mA val[1]
Start of the measurement range (4 mA value) for analog output 1.
12 mA val[1]
Measurement range inflection (12mA value) with bilinear characteristic
for analog output 1.
20 mA val[1]
Final value of the measurement range (20mA) for analog output 1.
T90 time, TD time, Range D, Dead time
Displays the relevant values. An explanation can be found in section
4.3.6.6 Output Parameters in the Operating Instructions.
Dispositif de mesure de conductivité SIPAN 32
C79000-B5477-C045-02
Publicité
Chapitres
