Live View - Comelit IPPTZ120IRD Manuel Utilisateur

Live view

Live preview interface as shown infigure 3-6:
In the Live view interface, users can do remote operations such as master/slave stream video preview, voice intercom, listen,
Record, full-screen preview, Snap picture, PTZ control, preset, area scan, pattern scan, PTZ watch, preview video image volume adjustment,
Day/Night switch, Image Flip, Image Mode, etc.

Master/slave stream: notice the

Voice intercom: connect a sound box at the device voice output port, then connect a mike at the PC port. Click microphone icon
, then adjust the volume, the voice intercom between PC and Network High Speed Dome can be performed.

Listen: connect a sound pick-up at the device audio input port, click the audio icon
port.

Snap picture: click
The default file storage path is C:\IPCamera, users can set it at the Setting→Local→Local setting .

Full screen: click

Record: click
file storage path is C:\IPCamera\, users can set it at the Setting→Local→Local setting .

3D positioning: 3D position function can be opened or closed.

Switch the sidebar: click

Image parameters adjustment: Users can adjust the image parameters at the video preview interface, such as image brightness,
hue, contrast, saturation and sharpness, etc. as shown in Figure 3-7:
icon to do screen video capture, it will create BMP picture and store in the specified folder automatically.
icon to get full screen preview, press ESC or right mouse click to exit full screen preview.
icon to do manual video operation and store in the specified file automatically (Video format is mp4, the default
or icon to switch to the sidebar.
Figure 3-6
buttons at the left lower corner, click it to switch the preview mode.
8
, users can call real time monitoring at PC