Güde GFO 1801 Traduction Du Mode D'emploi D'origine page 32

• The saw blade must be able to run freely.
32
• Pay special attention to any nails, screws, etc., when
sawing wood that has been previously treated
or worked in any way. Remove all foreign objects
before starting work.
• Before operating the main switch, make sure that
the saw blade is correctly seated and that the mov-
ing parts of the machine are unobstructed.
• WARNING! When in doubt: Have a specialist from
an authorised service centre help you assemble this
circular saw.
• Do not use the machine until you have carefully
read the operating instructions.
• Observe all safety instructions contained in these
operating instructions.
• Act responsibly towards other people.
SAFETY INSTRUCTIONS –
MAINTENANCE
• Only a regularly serviced and well-maintained
machine can be a useful tool. Lack of maintenance
and care can lead to unforeseeable accidents and
injuries.
RESIDUAL HAZARDS & PROTECTIVE
MEASURES
Risk of injury from rotating parts!
• Be careful with small workpieces, always use
the supplied push rod.
• A worn or damaged accessory must be re-
placed immediately.
Touching the rotating saw blade can lead
to serious injuries!
• Never touch the saw blade while it is moving.
Loose clothing, jewellery and hair can be
caught by moving parts!
• Always wear tight clothing and no jewellery,
protect your hair with a hair net.
Direct electrical contact: A defective cable
or plug can lead to electric shock!
• Always have defective cables or plugs replaced
by a specialist. Only use the machine at a con-
nection with a residual-current device (RCD).
Prolonged use of the machine may result
in hearing damage.
• Always wear hearing protection.
Indirect electrical contact: Injuries caused
by live parts when electrical components are
opened or defective!
• Always disconnect the mains plug during
maintenance work. Only operate the machine
with RCD connections.
A lot of dust can lead to damage to the
lungs. Emission of harmful wood dust during
operation without extraction.
• Always wear a dust mask when working with
the machine. Connect and use the extraction
unit.
Operating the machine without the appro-
priate protective equipment can lead to
serious external and internal injuries!
• Always wear the prescribed protective clothing
and work with caution.
Poor lighting poses a high safety risk!
• Always ensure adequate lighting when working
with the machine.
Parts of the saw blade or mechanical
particles can damage your eyes during
sawing.
• Always wear safety glasses when working with
the machine.
TRANSPORT, STORAGE & DISPOSAL
• The machine should be thoroughly cleaned if it is to
be stored for a long period of time.
• Always retract the saw blade during prolonged stor-
age to prevent injury.
• The handle lock must always be engaged when
transporting the circular table saw.
• Do not use the top protective cover as a handle for
transportation!
• Protect the saw from the weather with a plastic
tarpaulin, cardboard box or similar material.
• The disposal instructions can be found in the
pictograms on the machine or packaging. A descrip-
tion of the individual symbols can be found in the