ProMinent DELTA Mode D'emploi page 80

ProMinent ®
DeviceControl [Index 0x2A11, Subindex 0x00]
The operating mode can be specified in more detail using the object "DeviceControl".
Bit location
7 (MSB)
6
5
4
3
2
1
0 (LSB)
Table 2: DeviceControl bit values
If bit 6 (RESET) is set to '1', the pump is stopped (DeviceMode = 0x00), existing errors are
deleted and the batch memory is set to 0.
DeviceMode [Index 0x2A12, Subindex 0x00]
The CANopen operating mode of the pump can be configured using the object "DeviceMode".
Bit location
7 (MSB)
6
5
4
3
2
1
0 (LSB)
Table 3: DeviceMode bit values
Values of "DeviceMode" for:
Name [Index 0x3FBD]
The name of the pump can be set in "Name" (e.g. "acid pump").
Location [Index 0x3FBE]
The location of the pump can be entered in "location" (e.g. "basement 5").
Meaning
must be 0
Reset
must be 0
Flow control activated (option)
Calibration completed
must be 0
Batch memory active
must be 0
Meaning
must be 0
must be 0
must be 0
must be 0
must be 0
must be 0
Continuous operation [0], batch operation [1]
Stop [0] / Start [1]
a) stop
b) continuous operation
c) batch operation
0x00
0x01
0x02
Annex
25