Replacing The Sliding Washers; Cleaning - FIOR & GENTZ NEURO CLASSIC Notice D'utilisation

Boring and Reaming Measurements [mm]
System
Width
10mm
12mm
14mm
16mm
20mm

11.2 Replacing the Sliding Washers

Sliding washers are available in different thicknesses (e.g. GS2210-040 is 0.40mm thick). Each thickness has
a different marking (fig. 24). You will find the article numbers of the premounted sliding washers on the back
page of these instructions for use.

11.3 Cleaning

The system joint must be cleaned when necessary and during regular maintenance. For this purpose, disassem-
ble the system joint and clean the soiled system components with a dry cloth.
32
Repair
Bearing Nut
Bushing
Outer Ø
Inner Ø
6.0 6.0
7.0 7.0
8.5 8.5
9.6 9.6
10.5 10.5
0.40mm 0.45mm
Repair Ø Measure-
Bushing ment for
Outer Ø Boring
7.0 5.7
8.0 7.7
9.6 9.3
10.5 10.2
11.5 11.2
0.50mm 0.55mm
Ø Measure-
Art. No.
ment for
Repair Bushing
Reaming
6.0 H7 BP0706-L020
8.0 H7 BR0807-L020
9.6 H7 BR1009-L025
10.5 H7 BR1110-L030
11.5 H7 BR1211-L030
0.60mm
fig. 24