Reading The Joint Angles; Converting The System Ankle Joints; Converting Options; Conversion Of Neuro Vario-Classic To Neuro Vario-Spring - FIOR & GENTZ NEURO CLASSIC Notice D'utilisation

9.3

Reading the Joint Angles

There are markings (fig. 19) on all system joints and system stirrups
which indicate the angle of the system components to each other. This
allows you to check the individual normal posture (the orthosis' basic
alignment), record the joint angle and compare later deviations.
The distances between the degree markings for each system width can
be seen in the following table.
Degree Marking
System Width
Degree

10. Converting the System Ankle Joints

10.1 Converting Options

The following table shows the converting options for the system ankle joints.
System Ankle Joint
NEURO VARIO-CLASSIC
NEURO CLASSIC
(as supporting joint with corresponding system
stirrup)

10.2 Conversion of NEURO VARIO-CLASSIC to NEURO VARIO-SPRING

1 Demount the cover plate of the NEURO VARIO-CLASSIC system
joint.
2 Mount the functional unit of the NEURO VARIO-SPRING system
joint in the correct system width (fig. 20).
30
10mm 12mm 14mm
5° 5° 2°
16mm 20mm
2° 2°
Convertible into
NEURO VARIO-SPRING
NEURO SPRING
NEURO CLASSIC-SWING
NEURO SWING-CLASSIC
NEURO VARIO-CLASSIC 2
NEURO VARIO 2
NEURO VARIO-SWING
NEURO SWING
NEURO SWING 2
fig. 19
fig. 20