CARE & CLEANING yOUR BREVILLE COMPACT SMART OVEN™
Ensure the oven is turned OFF by pressing the
START/CANCEL button on the control panel.
The oven is OFF when the button surround
illumination is no longer red. Remove the
power plug from the power outlet. Allow the
oven and all accessories to cool completely
before disassembling and cleaning.
NOTE
Do not use abrasive cleansers, metal
scouring pads or metal utensils on any
of the interior or exterior surfaces of
the oven, including the crumb tray.
Do not use abrasive cleansers, metal
scouring pads or metal utensils to clean
any of the accessories as they may
damage the porcelain enamel finish of
the baking pan and broiling rack.
Cleaning the outer body and door
1.
Wipe the outer body with a soft, damp
sponge. A non-abrasive liquid cleanser
or mild spray solution may be used
to avoid build-up of stains. Apply the
cleanser to the sponge, not the oven
surface, before cleaning.
2.
To clean the glass door, use a glass
cleaner or mild detergent and a soft,
damp sponge or soft plastic scouring
pad. Do not use an abrasive cleanser or
metal scouring pad as these will scratch
the oven surface.
3.
Let all surfaces dry thoroughly prior to
inserting the power plug into a power
outlet and turning the oven ON.
IMPORTANT
Do not immerse the body, power cord
or power plug in water or any other
liquid as this may cause electrocution.
Cleaning the interior
1.
The walls on the inside of the oven
feature a non-stick coating for easy
cleaning. To clean any spattering that
may occur, wipe the walls with a soft,
damp sponge. A non-abrasive liquid
cleanser or mild spray solution may be
used to avoid build-up of stains. Apply
the cleanser to the sponge, not the oven
surface, before cleaning. Avoid touching
the quartz heating elements.
IMPORTANT
Use extreme caution when cleaning
the quartz heating elements. Allow the
oven to cool completely, then gently rub
a soft, damp sponge or cloth along the
length of the heating element. Do not
use any type of cleanser or cleaning
agent. Let all surfaces dry thoroughly
prior to inserting the power plug into a
power outlet and turning the oven ON.
2.
Let all surfaces dry thoroughly prior to
inserting the power plug into a power
outlet and turning the oven ON.
Cleaning the crumb tray
1.
After each use, slide out the crumb tray
and discard crumbs. Wipe the tray with
a soft, damp sponge. A non-abrasive
liquid cleanser may be used to avoid
build-up of stains. Apply the cleanser
to the sponge, not the tray, before
cleaning. Dry thoroughly.
2.
To remove baked-on grease, soak the
tray in warm soapy water then wash with
a soft sponge or soft plastic scouring
pad. Rinse and dry thoroughly.
3.
Always ensure to re-insert the crumb
tray into the oven after cleaning and
prior to inserting the power plug into a
power outlet and turning the oven ON.
47