TROUBLESHOOTING
PROBLEM
Oven will not switch "ON"
I would like to have the oven
LCd default settings back
The LCd display light has
gone out
The pizza does not
cook evenly
The pizza crust does
not crisp
I cannot select the FROZEN
FOOdS button
Steam is coming out from
the top of the oven door
EASy SOLUTION
•
Check that the power plug is securely inserted into
the power outlet
•
Insert the power plug into an independent power outlet
•
Insert the power plug into a different outlet
•
Reset the circuit breaker if necessary
•
The oven will remember the last setting used for
each function unless you remove the power plug
from the power outlet.
•
To restore the oven's default settings for each
function, remove the power plug from the power
outlet. Wait 5 seconds, then plug back in.
•
The oven goes into STANDBY mode if not used
for 10 minutes. When in STANDBY mode, the LCD
screen will cease to illuminate, however 'STANDBY'
will still be visible.
•
To re-activate the oven out of STANDBY mode, press
the START/CANCEL button on the control panel, or
turn any dial. The LCD screen will re-illuminate.
•
Some large pizzas may brown unevenly in compact
ovens. Open the oven door half way through the
cooking time and turn the pizza 90 degrees for more
even browning.
•
Breville recommends using a dark colored, non-stick
pizza pan when cooking a pizza. Light colored pans
reflect heat and may not effectively crisp the pizza
crust. Oven accessories are available at breville.com
•
For a crisper crust, pizzas can be cooked directly
on the wire rack. However care should be taken as
melted cheese and other ingredients may build-up on
the heating elements and create a potential fire risk.
•
The FROZEN FOODS button is only selectable
during the TOAST, BAGEL, BAKE, PIZZA and
COOKIE functions.
•
This is normal. The door is vented to release steam
created from high-moisture content foods such as
frozen breads.
51