Door Sensor; Auto Eject Rack; Buzzer Volume; Rotate Remind - Breville BOV900 Serie Manuel D'instructions

basket, pizza pan, broiling rack and/or
roasting pan. Ensure the food is centered in
the oven for the most even cooking.
b) Close the oven door.
c) The timer will continue to count down.
The cooking temperature and time can be
adjusted during the cooking cycle.
7. At the end of the cooking cycle, the oven
alert will sound, the START/STOP button
backlight will go out and the LCD screen
will illuminate white.
NOTE
The cooking cycle can be stopped at any time
by pressing the START/STOP button. This will
cancel the cycle and the button backlight will
illuminate white.
NOTE
Press the CONVECTION button to choose
between no convection, convection and super
convection. Convection and super convection
may adjust the temperature to compensate.
Super convection will deliver crispier food
result.

DOOR SENSOR

If the door is opened during cooking, the timer
will pause and the light will turn on.
When the door is closed, the timer will resume
counting down and the light will stay on for
30 seconds before turning off. If the door
is open for longer than 10 minutes during
cooking the heaters will turn off.
MAGNETIC AUTO-EJECT RACK
When the wire rack is inserted into rack
position 3 or 4, it will automatically eject
halfway out of the oven when the door is
opened so you can easily remove your food.
Always open the door slowly when the wire
rack is in this position to prevent the rack from
ejecting too quickly.

BUZZER VOLUME

Press and hold the TEMPERATURE
CONVERSION button for 3 seconds to enter
the buzzer volume control mode.
Press the TEMPERATURE CONVERSION
button to select the desired volume. To confirm
press any button.

ROTATE REMIND

When cooking food on multiple racks at
one time, use the Rotate Remind feature to
remind you to switch the position of food in
the oven for the most even, consistent results.
Rotate Remind is available for the following
functions: BAKE, ROAST, WARM, PROOF,
PIZZA, AIR FRY, REHEAT, COOKIES and

DEHYDRATE.

1. Turn the SELECT/CONFIRM dial until the
indicator on the LCD screen reaches your
desired function.
2. Press the SELECT/CONFIRM dial. 'Rotate
Remind' will display on the LCD screen.
3. Follow the steps for the function you
selected and begin cooking your food.
4. When it is time to switch rack positions,
the Rotate Remind alert will sound and
'Rotate Remind' will flash on the screen.
The Rotate Remind alert will continue to
sound every 30 seconds until the door is
opened or the SELECT/CONFIRM dial is
pressed to disable the feature.
13