Mounting The Inverter - SMA MLX Série Guide D'installation

Installation
2 2
Illustration 2.9 Mounting Plate
NOTICE
Use of the mounting plate delivered with the inverter is
mandatory. If the inverter is mounted without the
mounting plate, the guarantee becomes void.
It is highly recommended to use all 6 mounting holes.
Mount the mounting plate:
•
Install in the defined environment.
•
Use screws and wall plugs that can safely carry
the weight of the inverter.
•
Ensure that the mounting plate is correctly
aligned.
•
Observe safe clearances when installing 1 or
more inverters, to ensure adequate airflow.
Clearances are specified in Illustration 2.8 and on
the mounting plate label.
•
Mounting multiple inverters in a single row is
recommended. Contact the supplier for
guidelines when mounting inverters in more than
1 row.
•
Ensure adequate clearance at the front, for safe
installation and service access to the inverter.
.
14
Illustration 2.10 Mounting the Mounting Plate

2.3 Mounting the Inverter

CAUTION
Refer to local health and safety regulations when
handling the inverter.
Procedure:
1. Lift the inverter. Locate the slots on the side of
the mounting plate. Use M12 or ½ in lifting bolts
and matching nuts (not part of delivery).
Illustration 2.11 Position the inverter
L00410644-01_2q / Rev. date: 2014-06-02