Mounting The Inverter - SMA SUNNY TRIPOWER 12000TL-US Instructions D'installation

SMA Solar Technology America LLC
Figure 5 : Permitted and prohibited mounting positions
5.2

Mounting the Inverter

Additionally required mounting material (not included in the scope of delivery):
☐ At least two screws suitable for the support surface (diameter: 10 mm at maximum)
☐ At least two washers that are suitable for the screws (diameter: 30 mm (1.8 in) at maximum)
☐ If necessary, two screw anchors suitable for the support surface and the screws
☐ For transporting the inverter with a crane: two eye bolts suitable for the weight of the inverter
(size: M10)
☐ To secure the inverter from being lifted off: two screws, washers and screw anchors that are
suitable for the support surface
Installation Manual
5 Mounting
STPTL-US-10-IA-xx-22 23