Troubleshooting; Filter - BWT Soliflow Notice D'installation Et Conseils D'utilisation

18.

TROUBLESHOOTING

18.1

Filter

PROBLEM: Air bubbles rise from the return fitting(s)
The filter bag is clogged (Soliflow's flow rate has
dropped significantly)
The clogging indicator is faulty (the flow rate is
normal)
PROBLEM: Significant drop in Soliflow's flow rate with no air bubbles rising from the return fitting(s)
The pump impeller is obstructed
PROBLEM: Dirt is being returned to the pool hrough the return fitting(s).
The filter bag is holed (too clogged)
The filter bag is incorrectly positioned
After this type of problem, check the pump impeller for debris (see the previous section).
36/40
2021/01 - Indice de révision : I - Code : 26901
CAUSE
CAUSE
CAUSE
SOLUTION
Filter bag: replace the bag
Cartridge: clean or replace the cartridge
Replace the clogging indicator
Disconnect the power supply.
Dismantle the pump and clean the impeller.
Reassemble the pump and reconnect the power
supply.
Do not forget to reset the timer.
Replace the filter bag or cartridge
Adjust the position of the filter bag or cartridge
SOLUTION
SOLUTION
BWT myPOOL
FILTRATION