Vimar SL24.W Guide Rapide Installateur page 20

SL24.W
Synchronization output, com-
pass type interlock (INB)
Automatically configures input S4
as synchronization input without
any choice by the user.
The control panel consents to the
gate opening only if the other gate
is in the closed position.
Synchronization output, com-
pass type interlock (INP) with
A2
presence signal.
Automatically configures input
S4 as synchronization input and
S3 as presence input without any
choice by the user.
The control panel consents to the
gate opening only if the other gate
is in the closed position and the
presence input is occupied.
Auxiliary Radio Output Configu-
ration
Impulsive: the output is active for
1 s following the RAU command
from the remote control
Timed: the output is active for the
RAU
time set in the RAUT parameter
following the RAU command from
the remote control
Bistable: the output works in
Step-Step ON/OFF mode
RAU output timing
1 s (minimum time)
RAUT
600 s (maximum time)
Courtesy light timer
1 s (minimum time)
LCO
300 s (maximum time)
SCA output operating mode
Gate closed: off
Gate open: on fixed
Gate closed: off
Gate moving: intermittent
Gate open: on fixed
Indeterminate position: intermittent
SCA
pause of 1 s every 5
Gate closed: off
Gate opening slow intermittent
Gate open on fixed
Gate closing intermittent
Indeterminate position: intermittent
pause of 1s every 5
Gate stopped on fixed
Gate moving off
SCA
Gate closed off
Gate moving on fixed
18
Input configuration
Sub Description
menu
C1/C2/C3/C4 command input
7
Step-step (PP)
The step-step control:
- with the gate stopped and closed,
- in opening, stops or closes the
- with the gate stopped after
8
- in closing, stops or opens the gate
- with the gate stopped after clos-
Pedestrian (PED)
(1)
Opens the gate to the pedestrian
position
It acts like a step-step if the com-
1
mand is given with the gate in a
position beyond the pedestrian
position
2
Open (OPEN)
The open command:
- with the gate stopped and
C(X)
3
closed, opens the gate
- in opening is ignored
(1)
- with the gate open, resets the
1
pause time
600
- with the gate stopped, opens the
(120)
gate
1
- in closing, opens the gate
300
Close (CLS)
(1)
The close command:
1 - with the gate stopped and
- in opening, closes the gate
- with the gate stopped, closes
2
- in closing is ignored
Timer (TIM)
The timer command:
- when closed, opens the gate
3
and keeps it open as long as the
contact remains closed
- when the contact is released it
closes the gate
4
Pedestrian Timer (TIMP)
Has the same function as the
5
timer command but on the pedes-
trian position
EN
opens the gate
gate according to the step-step
logic setting (L10)
opening, closes the gate
according to the step-step logic
setting (L10)
ing, opens the gate
closed, is ignored
the gate
Values
(default)
1
(C1)
2
(C2)
3
(C3)
4
(C4)
5
6