Console (Fig F); Explanation Of Buttons; Operation - Tunturi E80 Upright Bike Manuel De L'utilisateur

Console (fig F)

1. Display
2. Tablet/ book support
3. Buttons
⚠ CAUTION
• Keep the console away from direct sunlight.
• Dry the surface of the console when it is covered
with drops of sweat.
• Do not lean on the console.
• Only touch the display with the tip of your finger.
Make sure that your nails or sharp objects do not
touch the display.
‼ NOTE
• The console switches to standby mode when
the equipment is not used for 4 minutes. If the
console is in standby mode, the display shows
the room temperature

Explanation of buttons

BACK/ STOP
- Move back to previous window
- Stop the active training
QUICK START
- Start training without present settings.
All workout information will count up.
MAIN MENU
- It will go back to main menu.
- During training, sets console in "end your workout"
mode.
USER SETTING
- Press this button to enter User/Setting mode screen
- This button is of no use during workout
MODE/ ENTER
Turn functions
- Choose workout mode in main menu
- User/setting mode option selection
- Choose working item on the setting screen
- Increase or decrease the setting value
- Adjusting target value (high/low) during workout
- Shift up or down during T-Ride™ or T-Road workout
Horizontal
- Turning clockwise to choose option rightward.
- Turning counter-clockwise for leftward
Vertical
- Turning clockwise to shift up.
- Turning counter-clockwise to shift down
Press functions:
- Sport mode confirmation
- Option confirmation under User/Setting mode
- Confirmation of working item on setting screen
- Setting value confirmation
- Screen switching between BPM-NM or BPM-W
during workout
- Screen switching between BPM-M or BPM-FT
during T-Ride™
- Screen switching between Video - Profile during
T-Road
- Switching to next tutoring mode during T-Trainer™
External connections
USB port
Usb port can be used for:
- Service purposes such as software update.
‼ NOTE
• USB format should not be NTFS

Operation

Power on
- Press any key to power on the console when being
in sleep mode..
After loading the application (fig. F-01) the user
interface will be show main menu screen (fig. F-02).
Trainer is now ready to start your workout programming
or just select quick start and begin.
2 3
English