Function Lockout - Arjohuntleigh Enterprise 9600X Notice D'utilisation

Function lockout

Function lockout can be used to prevent operation of the
controls, e.g. when inadvertent movement of the mattress
platform could injure the patient.
To lock (prevent) or unlock (allow) functions:
Press the Function Lock button. The indicator above the button
will light.
Press the ACP button(s) corresponding to the function(s) to be
locked or unlocked. The "lock" indicator LED above each
function button shows its current status:
When all functions are locked or unlocked as required, press
the Function Lock button again or wait for five seconds. The
indicator above the Function Lock button will go out and the
lockout settings are stored.
The Bio-Contour/Auto-Chair functions use a combination of
Backrest, Thigh and Calf movements.
To stop the patient from using the Bio-Contour/Auto-Chair
functions the user must lock either the Backrest, Thigh or Calf
function from the ACP.
Function lockout settings are retained if the bed is disconnected
from the electricity supply.
LED on = function locked
LED off = function unlocked.
33