Arjohuntleigh Enterprise 9600X Notice D'utilisation page 26

Positioning the X-ray cassette
3
4
Pull the knob and slide the tray underneath the backrest.
The red moulding on the top of the X-Ray sitting tool indicates
the top right hand corner of the X-Ray cassette.Use this
feature to assist in accurate positioning.
X-Ray Sitting Tool
Release the knob to hold the tray in one of the latching
positions.
After use, pull the tray out to the fully open position and remove
the X-ray cassette. Return the tray to the closed position below
the backrest and replace the head board.
18