Technical Specifications; Guarantee - Solo 434 Instructions D'emploi

Engine type
Engine capacity
Bore / stroke
Engine power
Medium idling speed
Permissible speed
Fuel tank capacity
Capacity of liquid tank
Nominal volume
Mesh size liquid inlet filter / nozzle filter element
Residual liquid volume in tank after
machine stops regular spray output
Operating pressure
Output volume with standard nozzle
Spray Wand
Spray hose
Spray nozzle, standard
Sound pressure level L
Sound pressure level L
Weighted average of acceleration to ISO 7916 handle
at max. engine speed
Weight
Dimensions without spray wand and spray hose
The manufacturer guarantees problem free quality and will cover the cost of replacing parts which are
found to be faulty in material or show manufacturing defects within the prescribed guarantee period after
the date of purchase. Please note that specific guarantee conditions may differ from country to country.
When in doubt, please ask the vendor of the goods. The vendor of the product is responsible for
guarantee applications.
We hope you will understand that we cannot be liable for damage resulting from these causes:
 Non-compliance with operating instructions.
 Neglecting required maintenance and repair jobs.
 Damage caused by improper carburettor adjustment.
 Wear from normal use.
 Obvious overload by continuously exceeding the upper performance limit of the product.
 Using non-approved tools.
 Use of force, improper treatment, misuse and accidents.
 Damage from excessive heat due to dirt build up around the cooling fan housing.
 Attempted adjustments and repairs by non-qualified persons.
 Use of unsuitable spare parts or non-original parts if such parts are the cause of the damage.
 Use of unsuitable or stale fuel.
 Damage caused by using the product in the hire or rental industry.
Normal cleaning, adjustments or maintenance jobs cannot be claimed as part of the guarantee.
All guarantee work must be carried out by a service centre authorized by the manufacturer.

13. Technical Specifications

kW at rpm
at 5 bar operating pressure
at 10 bar operating pressure
at 20 bar operating pressure
Length in
Length in
Pressure resistant to
to EN ISO 22868
Peq
to EN ISO 22868
WAeq
m
net

14. Guarantee

Technical Specifications ; Guarantee
SOLO single cylinder two-stroke engine
3
cm
mm
rpm
rpm
l
l
l
mm
ml
bar
l/min
Material
mm
mm
bar
dB(A)
dB(A)
2
m/s
kg
mm Height: 570 / Width: 415 / Depth: 350
28.9
35 / 30
0.7 / 5,500
3,000 ±200
5,900 ± 200 [ 5 bar]
5,750 ± 200 [20 bar]
0,5
19 [5.02 gal]
18 [4.76 gal]
1.8 / 0.55
< 340
5 bar – 20 bar
1.0
1.4
1.9
Steel tube
500
1160
> 50
Double flat spray
92.4 ± 2.5 dB(A)
99.2 ± 2.5 dB(A)
2
< 2.0 ± 1m/s
9.5
ENGLISH 19